On3 TT DIY

[Motu365]

Anyone install the kit themselves and have wastegate pipes not fit? Is there a specific way to installing those piping? Any help will do, I'm waiting on a buddy to tap the oil pan for me so I can finish this install.

I'll be in Texas next summer to visit friends and family in Austin & Killeen areas. Hope to see yall then.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[CB900F]

Hey man!

I did the install. Couple things.

1. Where are you putting the oil lines in the pan?

2. Are you having trouble with the Drivers side?

For fun:

What fuel and boost you planning in running?

Sent from my SM-N910V using Tapatalk

[Motu365]

1.

2. Both sides



3. I was hoping Ford Racing 80# but after reading up on it, tuners apparently have difficulties with them. So I might have to save up for ID1000's. My goal is 700 rwhp with little track time.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[Motu365]

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[Motu365]

Pics aren't loading. When the oil pan is mounted, both holes will be drilled on the front side.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[CB900F]

Pics aren't loading. When the oil pan is mounted, both holes will be drilled on the front side.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

If you are drilling, the one on the left hand side (passenger side of car) will be real close to the oil pump pickup tube. Be careful. I assume if drilling you are welding?

For the alignment put the wastegate pipe on first, put the V-Band clamp loose on the turbo, manhandle the downpipe onto the turbo.

[CB900F]

Pics aren't loading. When the oil pan is mounted, both holes will be drilled on the front side.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

Oh and make sure the DP isn't connected to the rest of the exhaust. It will need to move around.

[Motu365]

If you are drilling, the one on the left hand side (passenger side of car) will be real close to the oil pump pickup tube. Be careful. I assume if drilling you are welding?

For the alignment put the wastegate pipe on first, put the V-Band clamp loose on the turbo, manhandle the downpipe onto the turbo.

Is there another option besides drilling? Thanks for that tip. I'll give it a go later today.


'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[CB900F]

If you are drilling, the one on the left hand side (passenger side of car) will be real close to the oil pump pickup tube. Be careful. I assume if drilling you are welding?

For the alignment put the wastegate pipe on first, put the V-Band clamp loose on the turbo, manhandle the downpipe onto the turbo.

Is there another option besides drilling? Thanks for that tip. I'll give it a go later today.


'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

This is what I used. Stolen from the Hellion install. It pushes the metal in and then you tap the metal.



What tune are you going with?

[Motu365]

I got referred to central texas performance??? Or Chris Holmes. Not sure yet. I wanna stay local but no one here I have found, has tuned this kit on these cars. Everyone has SC or single turbo on foxbody.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)