On3 TT DIY

[CB900F]

I got referred to central texas performance??? Or Chris Holmes. Not sure yet. I wanna stay local but no one here I have found, has tuned this kit on these cars. Everyone has SC or single turbo on foxbody.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

I've heard nothing but good stuff about Chris Holmes. Where are you located?

[Motu365]

If I were to get this kit, would I need anything else? Or is this all I need to run e85?
http://www.jmschip.com/2011-2014-mustan ... g-package/

I like speed, but I'm not mechanically inclined. Installing the kit myself was a way to start learning.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[Motu365]

I'm in Vancouver, Wa

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[Motu365]

I got turned down by 3 of the top mustang shops in town. As soon as I said On3, they said no thank you.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[CB900F]

If I were to get this kit, would I need anything else? Or is this all I need to run e85?
http://www.jmschip.com/2011-2014-mustan ... g-package/

I like speed, but I'm not mechanically inclined. Installing the kit myself was a way to start learning.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

If you keep it on low boost, yes that will work. With the 60mm turbos you have the possibility to push up to 1k rwhp. With that Boost A Pump and injectors you will max out around 750ish.

Welding the pan is a better idea than tapping btw. If you can weld it, do it.

That's funny. I've compared a Hellion TT tune to a On3 TT tune and there are no real differences. Hit up Chris Holmes. You will be happy.

[Motu365]

How much is low boost?

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[CB900F]

How much is low boost?

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

I'd say around 10psi. On e85 it should still make a little over 700rwhp through a stalled Auto. If you are a stick it will make a bit more.

Might want to look at doing oil pump gears too. Mine blew at 11.5psi.

[CB900F]

How much is low boost?

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

Not sure when you ordered your kit, but I just hit-up a couple of buddies, they said the new kits are tight. One actually had the turbo loose on the manifold, hooked up the DP, then used a punch to align it back to the manifold to get the bolts in.

[Motu365]

Yikes, I'll look into oil pump gears. Can I run 8 lbs on the preloaded springs or do I have to swap em out?

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)

[Motu365]

I can't do anything yet until I get the oil pan back on. I'm almost ashamed to say that I operate off jack stands.

I'm so close to finishing up. I have the latest revision kit. Superchargers sound nice, but the trouble I went through getting these twins on better be worth it.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)