On3 TT DIY

Introductions, and site info here

On3 TT DIY

Postby Motu365 » Sun Oct 25, 2015 8:24 pm

Anyone install the kit themselves and have wastegate pipes not fit? Is there a specific way to installing those piping? Any help will do, I'm waiting on a buddy to tap the oil pan for me so I can finish this install.

I'll be in Texas next summer to visit friends and family in Austin & Killeen areas. Hope to see yall then.Image

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)
Motu365
 
Posts: 15
Joined: Sat Oct 24, 2015 12:25 am

Re: On3 TT DIY

Postby CB900F » Sun Oct 25, 2015 8:26 pm

Hey man!

I did the install. Couple things.

1. Where are you putting the oil lines in the pan?

2. Are you having trouble with the Drivers side?

For fun:

What fuel and boost you planning in running?

Sent from my SM-N910V using Tapatalk
2013 Gray Mustang 5.0
Twin 60mm Turbo's
Enough PSI to beat FiveOh and User_Name

http://facebook.com/600PlusRacing
http://Youtube.com/600PlusRacing
CB900F
 
Posts: 581
Joined: Sun Sep 28, 2014 9:23 am
Location: In front of you
Blog: View Blog (1)

Re: On3 TT DIY

Postby Motu365 » Sun Oct 25, 2015 8:35 pm

1. Image

2. Both sides

Image

3. I was hoping Ford Racing 80# but after reading up on it, tuners apparently have difficulties with them. So I might have to save up for ID1000's. My goal is 700 rwhp with little track time.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)
Motu365
 
Posts: 15
Joined: Sat Oct 24, 2015 12:25 am

Re: On3 TT DIY

Postby Motu365 » Sun Oct 25, 2015 8:37 pm

Image

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)
Motu365
 
Posts: 15
Joined: Sat Oct 24, 2015 12:25 am

Re: On3 TT DIY

Postby Motu365 » Sun Oct 25, 2015 8:38 pm

Pics aren't loading. When the oil pan is mounted, both holes will be drilled on the front side.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)
Motu365
 
Posts: 15
Joined: Sat Oct 24, 2015 12:25 am

Re: On3 TT DIY

Postby CB900F » Mon Oct 26, 2015 8:32 am

Motu365 wrote:Pics aren't loading. When the oil pan is mounted, both holes will be drilled on the front side.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)


If you are drilling, the one on the left hand side (passenger side of car) will be real close to the oil pump pickup tube. Be careful. I assume if drilling you are welding?

For the alignment put the wastegate pipe on first, put the V-Band clamp loose on the turbo, manhandle the downpipe onto the turbo.
2013 Gray Mustang 5.0
Twin 60mm Turbo's
Enough PSI to beat FiveOh and User_Name

http://facebook.com/600PlusRacing
http://Youtube.com/600PlusRacing
CB900F
 
Posts: 581
Joined: Sun Sep 28, 2014 9:23 am
Location: In front of you
Blog: View Blog (1)

Re: On3 TT DIY

Postby CB900F » Mon Oct 26, 2015 8:38 am

Motu365 wrote:Pics aren't loading. When the oil pan is mounted, both holes will be drilled on the front side.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)


Oh and make sure the DP isn't connected to the rest of the exhaust. It will need to move around.
2013 Gray Mustang 5.0
Twin 60mm Turbo's
Enough PSI to beat FiveOh and User_Name

http://facebook.com/600PlusRacing
http://Youtube.com/600PlusRacing
CB900F
 
Posts: 581
Joined: Sun Sep 28, 2014 9:23 am
Location: In front of you
Blog: View Blog (1)

Re: On3 TT DIY

Postby Motu365 » Mon Oct 26, 2015 8:40 am

If you are drilling, the one on the left hand side (passenger side of car) will be real close to the oil pump pickup tube. Be careful. I assume if drilling you are welding?

For the alignment put the wastegate pipe on first, put the V-Band clamp loose on the turbo, manhandle the downpipe onto the turbo.


Is there another option besides drilling? Thanks for that tip. I'll give it a go later today.


'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)
Motu365
 
Posts: 15
Joined: Sat Oct 24, 2015 12:25 am

Re: On3 TT DIY

Postby CB900F » Mon Oct 26, 2015 8:48 am

Motu365 wrote:
If you are drilling, the one on the left hand side (passenger side of car) will be real close to the oil pump pickup tube. Be careful. I assume if drilling you are welding?

For the alignment put the wastegate pipe on first, put the V-Band clamp loose on the turbo, manhandle the downpipe onto the turbo.


Is there another option besides drilling? Thanks for that tip. I'll give it a go later today.


'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)



This is what I used. Stolen from the Hellion install. It pushes the metal in and then you tap the metal.

Image

What tune are you going with?
2013 Gray Mustang 5.0
Twin 60mm Turbo's
Enough PSI to beat FiveOh and User_Name

http://facebook.com/600PlusRacing
http://Youtube.com/600PlusRacing
CB900F
 
Posts: 581
Joined: Sun Sep 28, 2014 9:23 am
Location: In front of you
Blog: View Blog (1)

Re: On3 TT DIY

Postby Motu365 » Mon Oct 26, 2015 8:52 am

I got referred to central texas performance??? Or Chris Holmes. Not sure yet. I wanna stay local but no one here I have found, has tuned this kit on these cars. Everyone has SC or single turbo on foxbody.

'13 Saleen S302 white label #19
Hurst short throw shifter
Pypes Pype Bomb Axleback
On3 twin turbos(installing)
Motu365
 
Posts: 15
Joined: Sat Oct 24, 2015 12:25 am

Next


Return to The Basics




Users browsing this forum: No registered users and 0 guests

cron